⚙️Hardware Update
This is a guide to help you update your PDU hardware driver version.
Insert New SD Card
Insert the new SD card with the software update and wait for the PI to boot. You will be able to identify you have connected to the proper device by checking the WIFI SSID or Wifi Name with the label on the Raspberry Pi Ethernet Port.
Adjust Settings on New Software
Navigate to PDU Configuration on the sidebar.
Go to the Driver tab.
Click Continue on the Software Update warning.
Located under Hardware Driver Version, select the appropriate version you recorded earlier.
If you are using v1.3, we recommend using v1.3.1-blue as the hardware driver. Click Update. Allow the system to update.

Port Alignment
To identify the proper side, face towards the fans and determine whether your PDU is on the Left or Right side.
Navigate to PDU Configuration on the sidebar.
Go to the Driver tab.
In the Hardware PDU Config box
Type 1 if your PDU is to your left.
Type 0 if your PDU is on the right.
Click Save Changes.

Last updated

